The thickness and dimension of the cutter sleeve blade of the slitter are consistent, and they will meet the requirements of the drawing later. Later, we should pay attention to that the outer diameter of the blade is consistent, and the parallelism and coaxiality of the blade meet the requirements of the drawing; The blade edge of the slitter shall be free from collision, meat loss, abrasion, etc; The thickness and dimension of the spacer shall meet the requirements of the drawing, and the parallelism dimension of the spacer shall meet the requirements; Other dimensions shall meet the drawing requirements.
Whether the slitter can be operated manually:
As for the slitting machine equipment, observe whether it can realize no manual operation. Generally speaking, we should pay attention to that it can also realize no manual operation to a large extent. The robot tool change technology is used to improve the automation level of the equipment. In this way, the above purposes can be achieved. The parameters of the slitter mainly include specification parameters and technical parameters. Therefore, equipment configuration shall be selected and determined according to specific parameters.