Production process of spiral steel pipes

First of all, grease the sliding bearing surface on the feeding frame (uncoiler and winder) and move it left and right (once every three days); For the surface of the sliding bearing at the feeding shaft pressing plate on the longitudinal shear equipment, grease the end with a grease gun (once a week, clean the oil filling place before oil filling); Add lubricating oil to the brake connection area and move it back and forth several times (three times a week, pay attention to cleanliness).

The adjusting rollers and adjusting parts on the slitting machine are filled with lubricating oil (three times a week, pay attention to cleaning); Add grease at the adjustment position of upper and lower knives (worm gear and worm) (three times a week, pay attention to cleaning); The clutch of lower cutter shaft should also be filled with lubricating oil (three times a week, pay attention to cleaning).

For the maintenance of the scrap machine on the slitting machine, the support shaft should be filled with butter and moved left and right several times (three times a week, pay attention to cleaning); For the driving shaft of toothless screw group, we need to be careful when installing the slitter blade, add butter and move it left and right several times (three times a week, pay attention to cleaning); The sealing coil of each cylinder of the slitter shall be clean and filled with lubricating oil (three times a week, pay attention to cleaning).